Comparative study of the synbiotic effect of inulin and fructooligosaccharide with probiotics with regard to the various properties of fermented soy milk.

Numerous combinations of probiotics were explored to find the suitable starter culture for the development of synbiotic soy yoghurt which can give good product characteristics and may be acceptable among consumers. Prebiotics (fructooligosaccharide (FOS) and inulin) were supplemented in an attempt to reduce the after-taste of soymilk, improve acidification profile and growth of probiotics. The addition of prebiotics in soy milk significantly enhanced the acidification rate (10.82 to 23.00 × 10-3 pH units/min) and condensed the fermentation completion time. FOS-supplemented fermented soy milk showed better acidification and post-acidification profile as compared to inulin supplemented samples. The Streptococcus salivarius subsp. thermophilus (ST) - Lactobacillus acidophilus (LA) with FOS gave the better textural properties with firmer gel (350.10), lower adhesiveness (-93.10) and springiness (0.92), higher gumminess (164.50) and average cohesiveness (0.47). FOS-supplemented ST-LA-fermented samples showed good gel characteristics with higher elastic modulus (1672.39 Pa), viscous modulus (416.41 Pa), complex modulus (1723.53 Pa), lower tan δ (14) and higher overall acceptability scores (7.40) on a 9-point hedonic scale. Developed synbiotic soy fermented milk showed more than the 9 log cfu/ml count throughout storage which is required for probiotic functional food.

Comparative analysis of thermal-assisted high pressure and thermally processed mango pulp: Influence of processing, packaging, and storage.

Storage stability and shelf-life of mango pulp packed in three different packaging films and processed using an optimized thermal-assisted high pressure processing treatment 'HPP' (600 MPa/52 ℃/10 min) was analyzed during refrigerated (5 ℃) and accelerated (37 ℃) storage and compared with the conventional thermal treatment 'TT' (0.1 MPa/95 ℃/15 min). After processing, HPP resulted in relatively lower total color difference (3.5), retained higher ascorbic acid (95%), total phenolics (106%), total flavonoids content (118%) in mango pulp compared to TT, with values of 5.0, 62, 83, 73%, respectively. However, HPP led to ∼50% enzymes inactivation (pectin methylesterase, polyphenol oxidase, peroxidase) in comparison to >90% obtained during TT. Both HPP and TT resulted in > 5 log10 units reduction of the studied microorganisms to give a safe product. In contrast to the refrigerated storage, quality changes under accelerated conditions were found to be considerably rapid and dependent on packaging material irrespective of the method of processing. Shelf-life under refrigeration was limited by microbial growth and sensory quality; whereas, browning restricted the shelf-life during accelerated storage. HPP in aluminum-based retort pouch was adjudged superior processing -packaging combination for maximizing the shelf-life of mango pulp to 120 and 58 days during refrigerated and accelerated storage, respectively. In comparison, TT led to higher quality changes upon processing than HPP and resulted in shelf-life of 110 and 58 days under the same packaging and storage conditions, respectively.

Effect of high pressure and thermal processing on spoilage-causing enzymes in mango (Mangifera indica).

The aim of the present work was to model the effect of combined pressure-temperature processing on spoilage-causing enzymes in mango pulp; which conventionally are inactivated using high temperatures leading to inevitable quality losses. The inactivation of enzymes pectin methylesterase (PME), polyphenol oxidase (PPO) and peroxidase (POD) was studied in mango pulp within the pressure, temperature and hold-time ranges of 0.1 to 600MPa, 40 to 70°C and 1s to 90min, respectively. The enzyme inactivation was described as a dual process: initial change in activity during dynamic pressure build-up phase and subsequent decrease under isobaric-isothermal conditions. The former led to considerable increase in activities of all the three enzymes (p<0.05); however, the increased activity reduced with increased intensity of applied pressure-temperature. On the other hand, isobaric-isothermal conditions led to substantial inactivation (p<0.05), with 600MPa/70°C/20min treatment being most effective in reducing the activities of PME, PPO and POD to 32, 15 and 26%, respectively. The enzyme inactivation data was non-linear under isobaric-isothermal conditions and fitted to the nth-order reaction model, indicative of the occurrence of series of reactions possibly due to pressure-temperature interaction effects. The estimated reaction order 'n' was 0.815, 1.106 and 1.137 for PME, PPO and POD, respectively. The estimated reaction rate constant k (min-1) depicted PME to be the most baroresistant enzyme followed by POD and PPO. Temperature and pressure dependency of k was expressed in terms of activation energy and activation volume using the Arrhenius- and Eyring-type relations, respectively. An empirical model with good correlation between actual and predicted data (R2>0.90) was proposed to simulate the rate of enzyme inactivation under isobaric-isothermal conditions as a function of pressure and temperature.

Fourier Transform Near-Infrared Spectroscopy for rapid and simple determination of phytic acid content in green gram seeds (Vigna radiata).

The feasibility of measuring phytic acid content in green gram (Vigna radiata) seeds was investigated by Fourier Transform Near-Infrared (FT-NIR) spectroscopic technique. Pure phytic acid standards of varying concentrations were scanned using FTNIR spectroscopy. The spectra were measured in diffused reflectance mode by keeping 100-1500 mg/100g standard of pure phytic acid in small sample cuvette. A calibration model was developed using pure phytic acid standards of varying concentrations in the near-infrared region (4000-12,000 cm(-1)). FT-NIR spectroscopy with chemometrics, using the first derivative plus vector normalisation method could predict the phytic acid content in green gram seeds samples. The developed model was validated using cross-validation technique. Maximum coefficient of determination (R(2)) value of 0.97 was obtained for the calibration model developed. The developed model was applied to predict phytic acid content in green gram seeds samples within 1-2 min. The developed procedure was further validated by recovery studies by comparing with UV spectroscopic method of phytic acid determination.

Quantum-chemical (DFT, MP2) and spectroscopic studies (FT-IR and UV) of monomeric and dimeric structures of 2(3H)-Benzothiazolone.

Molecular geometry and vibrational wavenumbers of 2(3H)-Benzothiazolone (C7H5NSO, HBT) was investigated using density functional (DFT/B3LYP) method with 6-311+G(d,p) basis set. The vibrational wavenumbers are found to be in good agreement with experimental FT-IR spectra. Hydrogen-bonded dimer of HBT, optimized by counterpoise correction, was studied by MP2 and DFT/B3LYP at the 6-311+G(d,p) level and the effects of molecular association through NH---O hydrogen bonding were discussed. A detailed analysis of the nature of the hydrogen bonding, using topological parameters, such as electronic charge density, Laplacian, kinetic and potential energy density evaluated at bond critical points (BCP) has also been presented. The UV absorption spectra of the compound dissolved in ethanol and chloroform solutions were recorded in the range of 200-600 nm. The UV-vis spectrum of the title molecule was also calculated using TD-DFT method. The calculated energy and oscillator strength almost exactly reproduce the experimental data. Total and partial density of state (TDOS, PDOS) of the HBT in terms of HOMOs and LUMOs and molecular electrostatic potential (MEP) were calculated and analyzed. The electric dipole moment, polarizability and the first static hyper-polarizability values for HBT were calculated at the DFT/B3LYP with 6-311+G(d,p) basis set. The results also show that the HBT molecule may have nonlinear optical (NLO) comportment with non-zero values. Stability of the molecule arising from hyper-conjugative interactions and charge delocalization was analyzed using natural bond orbital (NBO) analysis.

High-Pressure Inactivation of Enzymes: A Review on Its Recent Applications on Fruit Purees and Juices.

In the last 2 decades high-pressure processing (HPP) has established itself as one of the most suitable nonthermal technologies applied to fruit products for the extension of shelf-life. Several oxidative and pectic enzymes are responsible for deterioration in color, flavor, and texture in fruit purees and juices (FP&J). The effect of HPP on the activities of polyphenoloxidase, peroxidase, ß-glucosidase, pectinmethylesterase, polygalacturonase, lipoxygenase, amylase, and hydroperoxide lyase specific to FP&J have been studied by several researchers. In most of the cases, partial inactivation of the target enzymes was possible under the experimental domain, although their pressure sensitivity largely depended on the origin and their microenvironmental condition. The variable sensitivity of different enzymes also reflects on their kinetics. Several empirical models have been established to describe the kinetics of an enzyme specific to a FP&J. The scientific literature in the last decade illustrating the effects of HPP on enzymes in FP&J, enzymatic action on those products, mechanism of enzyme inactivation during high pressure, their inactivation kinetics, and several intrinsic and extrinsic factors influencing the efficacy of HPP is critically reviewed in this article. In addition, process optimization of HPP targeting specific enzymes is of great interest from an industrial approach. This review will give a fair idea about the target enzymes specific to FP&J and the optimum conditions needed to achieve sufficient inactivation during HPP treatment.

Twin screw extrusion of kodo millet-chickpea blend: process parameter optimization, physico-chemical and functional properties.

Kodo millet-chickpea flour blend (70:30) was explored for development of directly expanded snack by twin-screw extrusion. Effect of process parameters like temperature (80-150 °C), screw speed (250-300 rpm) and feeder speed (15-30 rpm) on physical properties (expansion ratio, bulk density, hardness, crispiness) of extrudates were investigated and optimized using response surface methodology. Desirable crispy extrudates were obtained at higher screw speed 293 rpm, lower feeder speed 19 rpm, and medium to high temperature of 123 °C. Effect of extreme and intermediate process conditions on functional, proximate quality and colour of the extrudates were also evaluated.

Fermented milks and milk products as functional foods--a review.

Fermented foods and beverages possess various nutritional and therapeutic properties. Lactic acid bacteria (LAB) play a major role in determining the positive health effects of fermented milks and related products. The L. acidophilus and Bifidobacteria spp are known for their use in probiotic dairy foods. Cultured products sold with any claim of health benefits should meet the criteria of suggested minimum number of more than 106 cfu/g at the time of consumption. Yoghurt is redefined as a probiotic carrier food. Several food powders like yoghurt powder and curd (dahi) powder are manufactured taking into consideration the number of organisms surviving in the product after drying. Such foods, beverages and powders are highly acceptable to consumers because of their flavor and aroma and high nutritive value. Antitumor activity is associated with the cell wall of starter bacteria and so the activity remains even after drying. Other health benefits of fermented milks include prevention of gastrointestinal infections, reduction of serum cholesterol levels and antimutagenic activity. The fermented products are recommended for consumption by lactose intolerant individuals and patients suffering from atherosclerosis. The formulation of fermented dietetic preparations and special products is an expanding research area. The health benefits, the technology of production of fermented milks and the kinetics of lactic acid fermentation in dairy products are reviewed here.

Microwave drying for safe storage and improved nutritional quality of green gram seed (Vigna radiata).

The present study describes the effect of the microwave-heating method on disinfestations and physico characteristics, viz., grain size, grain hardness, and nutritional quality, of the stored green gram seed. It has been observed that the use of the microwave-heating method not only prolongs the storage duration of the green gram seed but also enhances its nutritional quality. The effect of independent parameters, viz., microwave power level and time of exposure, on the moisture content, insect mortality, color, and antinutrient factor (phyic acid) was optimized using response surface methodology (RSM), with the optimized value for power of 808 W and time at 80 s. The optimally treated green gram seed has 8.9% moisture, 99.5% insect mortality, 2.22 Δa* (green color of seed), and 591.79 mg/100 g of antinutrient factor (phytic acid). The grain size (geometric mean diameter, D(m)) of the control (untreated) sample was 3.75 mm, and that of the microwave-treated sample using optimum conditions was 3.99 mm. The grain hardness of the control sample was 3.31 kg, and that of the microwave-treated sample using optimum conditions was 1.305 kg. In vitro protein digestibility (IVPD) of the control (untreated) sample was 83 ± 0.289%, and that of the microwave-treated sample using optimum conditions was 85 ± 0.296%. These values are significantly difference (p < 0.05). The mineral elements studied were Zn, Fe, Mg, Mn, Cu, K, Ca, and Na. The microwave treatment resulted in a non-significant (p < 0.05) effect for Mg, Mn, Cu, K, and Na but a significant (p < 0.05) effect for Zn, Ca, and Fe. The results indicate that the microwave heating not only increases the insect mortality but also reduces the moisture content and antinutritional factor (phytic acid), while the natural green color of the seed is not affected much. This study provides a novel and environmentally safe technique and increase in the nutritive quality.

Nutritional changes in powdered red pepper upon in vitro infection of Aspergillus flavus / Alterações nutricionais em pimenta vermelha em pó após infecção in vitro com Aspergillus flavus

Quantitative losses in various biochemical constituents like capsaicin, carotenes, ascorbic acid, polyphenols,mineral matter, sugars (soluble and insoluble), protein and fat were estimated after the successful growth ofAspergillus flavus for 30 days on powdered red pepper. The fungal biomass was measured by ergosterolcontent and Aflatoxin B1 by HPLC. Amongst the various nutritional constituents evaluated for nutritionallosses and changes the highest nutritional loss was reported in total carotenoids (88.55%) followed by totalsugars (85.5%). The protein content of the infected sample increased from 18.01% to 23%. The nutritional profile of chilli powder (Capsicum annum var. sannam L.) shows highest share of total soluble sugars (32.89%) and fiber content (21.05%), followed by protein (18.01%) and fat (13.32%) making it an ideal solid - substrate for mould growth. At the end of incubation the fungal biomass was 192. 25 mg / 100 gram powder, total plate count 17.5 X 10 4 CFU/g and Aflatoxin B1 content was 30.06 μg / kg.

Foram avaliadas as perdas de vários constituintes bioquímicos como capsaicina, carotenos, acido ascórbico,polifenóis, matéria orgânica, açucares (solúveis e insolúveis), proteína e gordura em pimenta vermelha em pó após a multiplicação de Aspergillus flavus por 30 dias. A biomassa fúngica foi mensurada pelo conteúdo de ergosterol e aflatoxina por HPLC. Entre os vários constituintes avaliados, a maiorperda foi a de carotenóides totais (88,55%), seguido de açucares totais (85,5%). O conteúdo protéico da amostra infectada aumentou de 18,01% para 23%. O perfil nutricional da pimenta em pó (Capsicum annum var. sannam L.) indica alto teor de açucares totais (32,89%) e fibras (21,05%), seguido de proteína (18,01%) e gordura (13,32%), tornando-a umsubstrato ideal para crescimento de fungos. Ao final dos 30 dias, a biomassa fúngica foi 192,25 mg/100g, a contagem total em placas foi 17,5 x 104 CFU/g e o conteúdo de aflatoxina B1foi 30,06 μg/kg.

Nutritional changes in powdered red pepper upon in vitro infection of Aspergillus flavus.

Quantitative losses in various biochemical constituents like capsaicin, carotenes, ascorbic acid, polyphenols, mineral matter, sugars (soluble and insoluble), protein and fat were estimated after the successful growth of Aspergillus flavus for 30 days on powdered red pepper. The fungal biomass was measured by ergosterol content and Aflatoxin B1 by HPLC. Amongst the various nutritional constituents evaluated for nutritional losses and changes the highest nutritional loss was reported in total carotenoids (88.55%) followed by total sugars (85.5%). The protein content of the infected sample increased from 18.01% to 23%. The nutritional profile of chilli powder (Capsicum annum var. sannam L.) shows highest share of total soluble sugars (32.89%) and fiber content (21.05%), followed by protein (18.01%) and fat (13.32%) making it an ideal solid- substrate for mould growth. At the end of incubation the fungal biomass was 192. 25 mg / 100 gram powder, total plate count 17.5 X 10 (4) CFU/g and Aflatoxin B1 content was 30.06 µg / kg.

A review on biological control and metabolism of aflatoxin.

The series of events that led to the discovery of aflatoxin as a potent carcinogen, its biosynthesis, mechanism of action, structure-function relationship provide interesting insight into the economical and technological factors involved in the development of an effective control measure for the toxin. Scientists all over the world are making continuous efforts to explore a generalized process of detoxification, which can bring down the toxin content in heterogenous commodities to a threshold level. In this article biological control methods with special emphasis on in vivo and in vitro enzymatic detoxification of aflatoxin have been reviewed. Future areas of research involving large-scale enzymatic detoxification and modified atmosphere storage are also discussed.